shaft sinking mine winch

1,Large steel wire capacity 2,Stablility and reliability on operation 3,Can use in coal mine, metal mine, non-metallic mine

JZ series sinking winches are used in coal mine, metal mine, non-metallic mine for hanging the swaying tray, water pump, air compressor, grouting tube, wind-cone and other excavation facilities, also can use for hanging heavy loads on surface and underground.

Model	JZ-10/800	JZ-16/1000	JZ-16/1600	JZ-25/1320	JZ-25/1600	JZ-40/1800
Steel rope most greatly static tensity KN	100	160	160	250	250	400
Rope capacity m	800	1000	1600	1320	1600	1800
1st layer rope fast speed m/s	0.075	0.075	0.075	0.075	0.075	0.075
1st layer rope slow speed m/s	0.038	0.038	0.038	0.038	0.038	0.038
Steel rope winding layer on drum	7	8	10	10	10	11
Steel rope diameter mm	32	40	40	52	52	60
Drum diameter mm	800	1000	1050	1050	1250	1000
Drum width mm	1250	1415	1500	1768	1758	1520
Drum center height mm	800	1050	1300	1300	1595	1050
Reducer speed ratio(fast speed)	65.63	75.86	75.86	77.49	75.86	75.86
Reducer speed ratio(slow speed)	126.19	152.78	152.78	157.14	152.78	152.78
Total speed ratio(fast speed)	401.04	499.09	531.03	577.7	499.09	499.09
Total speed ratio(slow speed)	771.64	1005.12	1069.44	1164.7	1005.12	1005.12
Motor type	Y225M-8	YZR250M2-8	YZR280S-8	YZR280S-8	YZR315M-10	YZR250M2-8
Motor power KW	22	37	45	45	75	37
Motor rotating speed r/m	740	720	717	717	579	720
Motor voltage V	380	380	380	380	380	380
Dimention mm L*W*H	3283*2570*1770	3650*3200*2240	3827*3623*2500	4062*3623*2500	4625*4242*3166	3920*3200*2240
Total weight KG(excluding steel rope and electric control box)	7000	12680	14400	16035	17100	27000

shaft sinking mine winch